Mac 106/2

NEW BALER MAC106/2 THE LATEST MODEL OF THE /2 SERIES

MAC 106/2: MIDSIZE FOR RECYCLABLES AND RDF

BALES MEDIUM QUANTITIES OF MATERIALS COMING FROM SEPARATE COLLECTION

The MAC 106/2 is the latest model of the /2 series. It processes all kinds of materials coming from the separate collection.

MAC 106/2 baler has been designed for processing medium quantities of materials coming from the separate collection: plastic, PET, mixed paper, OCC and refuse derived fuel (RDF).

The result is a higher density of the bales combined with greater production, without requiring excessive effort from the machine.

The bale size obtained is ideal to optimize storage and transport using most common trucks, containers, and railroad cars.

Download the brochure available in English languages

CONTROL PANEL

CUTTING AND THRUST

HYDRAULICS

LINER

CONTROL PANEL

The control panel allows better management and operation of the baler: production parameters can be adjusted (pressure and counterpressure, bale length, etc …), reports and statistics can be checked, and a graphics system allows a real-time diagnosis of malfunctions.

HIGH EFFICIENCY BLADES

It features high efficiency and tempered cutting blades, which can be replaced according to the material to be treated: plastic, PET, mixed paper, OCC and refuse derived fuel (RDF).

SMART HYDRAULIC SYSTEM

Smart system adaptable to material Pumps positioned outside of oil tank for a better performance and easier maintenance.

HARDOX STEEL LINER

The wear-resistant HARDOX steel liners are bolted into the extrusion channel and into the compacting chamber and can be easily replaced, protecting the machine from abrasion and corrosion.

60 HP MOTOR POWER

CUTTING AND THRUST POWER 75 TON / 165 500 LB

Europa

PET 6 TON/H
OCC 12 TON/H
MIX PAPER 20 TON/H
RDF 24 TON/H

USA

PET 6.6 TON (US)/H
OCC 13.2 TON (US)/H
MIX PAPER 22 TON (US)/H
RDF 26.4 TON (US)/H

GENERAL SPECIFICATIONS	EUROPE	USA
OVERALL LENGTH	9 950	32’8’’
MAXIMUM WIDTH	5 050 (AT TIER STATION)	16’7’’
OVERALL HEIGHT	3 860 (AT FLANGE HOPPER)	12’7’’
FEED OPENING	1 800 x 1 020	71’’ X 40’’
BALE DIMENSIONS	1 100 x 750 (dimens. WxH)	43’’1/3 x 29’’1/2
BALER WEIGHT WITHOUT FLUFFER	21 000 KG (LESS OIL)	46 297 lb
BALER WEIGHT WITH FLUFFER	25 500 KG (LESS OIL)	56 217 lb
NUMBERS OF WIRES	4	4

NO LOAD PERFOMANCE

Note: Performance rates, bale weights and bale densities are subject to moisture content, material pre-bale densities, feed rates nand other variables in baling.

1.6 m3 56.5 ft3

LOADING VOLUME

439 m3/h 15 503 ft3/h

VOLUMETRIC PRODUCTION

4.6 4.6

CYCLES PER MINUTE

13 sec 13 sec

CYCLE TIME

HORIZONTAL TYING SYSTEM

ELECTRO-MECHANICAL HORIZONTAL TYING SYSTEM DESIGNED FOR TYING BOTH PLASTIC AND STEEL WIRES

This system simplifies the cleaning process for the tying unit, providing increased safety for the operator. The maintenance and cleaning of the tying unit is done at floor level; replacement of baling wire is at floor level, no pit needed.