Mac 106/2

NEW BALER MAC106/2 THE LATEST MODEL OF THE /2 SERIES

MAC 106/2: MIDSIZE FOR RECYCLABLES AND RDF

BALES MEDIUM QUANTITIES OF MATERIALS COMING FROM SEPARATE COLLECTION

The MAC 106/2 is the latest model of the /2 series. It processes all kinds of materials coming from the separate collection.

MAC 106/2 baler has been designed for processing medium quantities of materials coming from the separate collection: plastic, PET, mixed paper, OCC and refuse derived fuel (RDF).

The result is a higher density of the bales combined with greater production, without requiring excessive effort from the machine.

The bale size obtained is ideal to optimize storage and transport using most common trucks, containers, and railroad cars.

Download the brochure available in English languages

SCHALTTAFEL

SCHNITT UND SCHUB

HYDRAULIK

AUSKLEIDUNG

SCHALTTAFEL

The control panel allows better management and operation of the baler: production parameters can be adjusted (pressure and counterpressure, bale length, etc …), reports and statistics can be checked, and a graphics system allows a real-time diagnosis of malfunctions.

HOCHLEISTUNGSMESSER

It features high efficiency and tempered cutting blades, which can be replaced according to the material to be treated: plastic, PET, mixed paper, OCC and refuse derived fuel (RDF).

INTELLIGENTE HYDRAULIK

Smart system adaptable to material Pumps positioned outside of oil tank for a better performance and easier maintenance.

AUSKLEIDUNG MIT HARDOX-STAHL

The wear-resistant HARDOX steel liners are bolted into the extrusion channel and into the compacting chamber and can be easily replaced, protecting the machine from abrasion and corrosion.

60 HP MOTORLEISTUNG

SCHNITTLEISTUNG UND PRESSKRAFT 75 TON / 165 500 LB

Europa

PET 6 TON/H
PAPPE 12 TON/H
MISCHPAPIER 20 TON/H
EBS 24 TON/H

USA

PET 6.6 TON (US)/H
PAPPE13.2 TON (US)/H
MISCHPAPIER 22 TON (US)/H
EBS 26.4 TON (US)/H

ALLGEMEINE SPEZIFIKATIONEN	Europe (MM)	USA
MASCHINENLÄNGE	9 950	32’8’’
MAXIMALE BREITE	5 050 (an verdriller)	16’7’’
BAUHÖHE	3 860 (an trichter)	12’7’’
TRICHTER	1 800 x 1 020	71’’ X 40’’
BALLEN-ABMESSUNGEN	1 100 x 750 (dimens. BxH)	43’’1/3 x 29’’1/2
BALLENPRESSEN-GEWICHT OHNE WIRBULATOR	21 000 KG (Ohne öl)	46 297 lb
BALLENPRESSEN-GEWICHT MIT WIRBULATOR	25 500 KG (Ohne öl)	56 217 lb
ANZAHL DER DRÄHTE	4	4

LASTFREIE LEISTUNG

Anmerkung: Leistungsdaten, Gewicht und Dichte der Ballen sind abhängig von Luftfeuchtigkeit dem Schüttgewicht des Materails, der Beladungsgeschwindigkeit und -gleichmäßigkeit und andere Variablen, die den Pressenprozess beeinflussen können

1.6 m3 56.5 ft3

LADEVOLUMEN

439 m3/h 15 503 ft3/h

VOLUMETRISCHE PRODUKTION

4.6 4.6

DURCHLÄUFE PRO MINUTE

13 sec 13 sec

DURCHLAUFZEIT

HORIZONTAL TYING SYSTEM

ELECTRO-MECHANICAL HORIZONTAL TYING SYSTEM DESIGNED FOR TYING BOTH PLASTIC AND STEEL WIRES

This system simplifies the cleaning process for the tying unit, providing increased safety for the operator. The maintenance and cleaning of the tying unit is done at floor level; replacement of baling wire is at floor level, no pit needed.