Mac 106/2

NEW BALER MAC106/2 THE LATEST MODEL OF THE /2 SERIES

MAC 106/2: MIDSIZE FOR RECYCLABLES AND RDF

BALES MEDIUM QUANTITIES OF MATERIALS COMING FROM SEPARATE COLLECTION

The MAC 106/2 is the latest model of the /2 series. It processes all kinds of materials coming from the separate collection.

MAC 106/2 baler has been designed for processing medium quantities of materials coming from the separate collection: plastic, PET, mixed paper, OCC and refuse derived fuel (RDF).

The result is a higher density of the bales combined with greater production, without requiring excessive effort from the machine.

The bale size obtained is ideal to optimize storage and transport using most common trucks, containers, and railroad cars.

Download the brochure available in English languages

PANNEAU DE COMMANDE

COUPE ET POUSSÉE

HYDRAULIQUE

REVÊTEMENT

PANNEAU DE COMMANDE

The control panel allows better management and operation of the baler: production parameters can be adjusted (pressure and counterpressure, bale length, etc …), reports and statistics can be checked, and a graphics system allows a real-time diagnosis of malfunctions.

COUTEAUX HAUTE PERFORMANCE

It features high efficiency and tempered cutting blades, which can be replaced according to the material to be treated: plastic, PET, mixed paper, OCC and refuse derived fuel (RDF).

SYSTÈME HYDRAULIQUE INTELLIGENT

Smart system adaptable to material Pumps positioned outside of oil tank for a better performance and easier maintenance.

REVÊTEMENT EN ACIER HARDOX

The wear-resistant HARDOX steel liners are bolted into the extrusion channel and into the compacting chamber and can be easily replaced, protecting the machine from abrasion and corrosion.

60 HP PUISSANCE MOTEUR

PUISSANCE DE COUPE ET DE POUSSÉE 75 TON / 165 500 LB

Europa

PET 6 TON/H
OCC 12 TON/H
MIX PAPER 20 TON/H
RDF 24 TON/H

USA

PET 6.6 TON (US)/H
OCC 13.2 TON (US)/H
MIX PAPER 22 TON (US)/H
RDF 26.4 TON (US)/H

SPÉCIFICATIONS GÉNÉRALES	EUROPE	USA
LONGUEUR TOTALE	9 950	32’8’’
LARGEUR MAXIMALE	5 050 (au chariot aiguilles)	16’7’’
HAUTEUR MAXIMALE	3 860 (à la trémie à bride)	12’7’’
TRÉMIE DE CHARGEMENT	1 800 x 1 020	71’’ X 40’’
DIMENSIONS BALLES	1 100 x 750 (dimens. LxH)	43’’1/3 x 29’’1/2
POIDS PRESSE SANS VIRBULATEUR	21 000 KG (sans huile)	46 297 lb
POIDS PRESSE AVEC VIRBULATEUR	25 500 KG (sans huile)	56 217 lb
NOMBRE DE FILS	4	4

PRESTATIONS À VIDE

Les taux de rendement, le poids et la densité des balles dépendent de l’humidité et de la densité du matériau d’entrée, le taux d’alimentation et d’autres variables qui peuvent influer sur le processus de pressage.

1.6 m3 56.5 ft3

VOLUME DE CHARGEMENT

439 m3/h 15 503 ft3/h

PRODUCTION VOLUMÉTRIQUE

4.6 4.6

CYCLES À LA MINUTE

13 sec 13 sec

TEMPS DE CYCLE

HORIZONTAL TYING SYSTEM

ELECTRO-MECHANICAL HORIZONTAL TYING SYSTEM DESIGNED FOR TYING BOTH PLASTIC AND STEEL WIRES

This system simplifies the cleaning process for the tying unit, providing increased safety for the operator. The maintenance and cleaning of the tying unit is done at floor level; replacement of baling wire is at floor level, no pit needed.