Mac 111/1

LARGE-SIZED BALER FOR PROCESSING SECONDARY RAW MATERIALS

MAC 111/1: BALER FOR PROCESSING SECONDARY RAW MATERIALS AND BALING LARGE QUANTITIES OF PRODUCT

FOR COMPACTING AND BALING LARGE QUANTITIES OF MIXED PAPER, PET, OCC

The MAC 111/1 baler has been designed to treat large quantities of materials in a short time: from paper to PET up to RDF, the MAC 111 is one of the most efficient balers of the Macpresse range, in terms of timing and bale density.

It treats very different materials (OCC, PET, mixed paper) to obtain a bale format perfect for storage and transport with the most common methods, such as trucks, containers and railroad cars.

Download the brochure available in 6 languages

DOWNLOAD BROCHURE
CONTROL PANEL
+
CUTTING AND THRUST
+
HYDRAULICS
+
LINER
+

CONTROL PANEL

The control panel allows better management and operation of the baler: production parameters can be adjusted (pressure and counterpressure, bale length, etc …), reports and statistics can be checked, and a graphics system allows a real-time diagnosis of malfunctions.

HIGH EFFICIENCY BLADES

The cutting system is a high efficiency system and the blades of the MAC 111/1 baler are tempered and wear-resistant to optimize the excess material cutting process in the compacting chamber.

SMART HYDRAULIC SYSTEM

The hydraulic system adapts to the material to be treated and the baler is equipped with pumps outside of the oil tank for better performance and easier maintenance. Variable flow pumps provide a perfect balance

between thrust pressure and processing speed, while the high-efficiency IE3 motors guarantee consumption that are 30% lower compared to traditional motors.

HARDOX STEEL LINER

The MAC 111/1 baler is protected with wear-resistant HARDOX steel liners which are bolted into the extrusion channel and into the compacting chamber and can be quickly and safely replaced.

2X75 HP MOTOR POWER
CUTTING AND THRUST POWER 170 ton / 374 800 lb

Europa

  • PET 12 TON/H
  • CARDBOARD 22 TON/H
  • MIX PAPER 35 TON/H
  • RDF/SRF 40 TON/H

USA

  • PET 13.2 TON(US)/H
  • CARDBOARD 24.3 TON(US)/H
  • MIX PAPER 38.6 TON(US)/H
  • RDF/SRF 43 TON/H
GENERAL SPECIFICATIONS EUROPE USA
OVERALL LENGTH 12 960 42'6"
MAXIMUM WIDTH 6 010 (at tier station) 19'9"
OVERALL HEIGHT 4 315 (at flange hopper) 14'2"
FEED OPENING 1 800 x 1 020 71" x 40"
BALE DIMENSIONS 1 100 x 1 100 (dimens. WxH) 43"1/3 x 43"1/3
BALER WEIGHT WITHOUT FLUFFER 41 900 Kg (less oil) 92 373 lb
BALER WEIGHT WITH FLUFFER 46 900 Kg (less oil) 103 396 lb
NUMBERS OF WIRES 5 5
NO LOAD PERFOMANCE

Note: Performance rates, bale weights and bale densities are subject to moisture content, material pre-bale densities, feed rates nand other variables in baling.

2.5 m³ 88 ft³

LOADING VOLUME

686 m³/h 24 225 ft³/h

VOLUMETRIC PRODUCTION

4.5 4.5

CYCLES PER MINUTE

13 sec 13 sec

CYCLE TIME

Horizontal tying system

MACC 111/1 is a baler for secondary raw materials processing large quantities of waste that must be recovered, from PET to mixed paper. Its horizontal tying system can feature 5+3, 5 or 4 wires.

MATERIALS BALED BY mac 111/1

  • HIGH DENSITY BALES

  • WATERPROOF

  • EASY TO HANDLE

  • OPTIMAL STORAGE

  • ROAD TRANSPORT

  • RAIL TRANSPORT

  • SEA TRANSPORT

DOWNLOAD THE BROCHURE FOR MORE INFORMATION

Fill in the fields below to get all the details about the product or sector you are interested into



    If the download does not start automatically click here