MAC 108/2

NEW STANDARDS FOR BALING PLASTICS

THE NEW MULTI-MATERIAL BALER FOR BALING PLASTIC MATERIALS

IT BALES ALL PLASTIC MATERIALS IN PARTICULAR HDPE AND PET

The MAC 108/2 is the second model in our new generation of balers, recommended in particular for baling plastic materials like HDPE and PET.

It is the baler for those who have medium/high production requirements and who also need to obtain very high-density bales to reach the weight limits permitted in a container.

To combine these two requests, our designers created the new machine so that it would reach a specific pressure up to more than 20 kg/cm2, with bale format of 110×75 cm to reduce the empty spaces in the cargo vehicles to a minimum.

The result is a machine can reach densities above 500 kg/m3 with non-perforated PET; by adding the smaller bale size, optimized for transport efficiency (three rows vertically), the result is the possibility to load above 24 tonnes of PET on a truck.

Thus the bales produced with this baler have very high density, ideal for arranging the maximum weight that can be loaded in a lorry and container.

DOWNLOAD BROCHURE
CONTROL PANEL
+
CUTTING AND THRUST
+
HYDRAULICS
+
LINER
+

CONTROL PANEL

The control panel allows better management and operation of the baler: production parameters can be adjusted (pressure and counterpressure, bale length, etc …), reports and statistics can be checked, and a graphics system allows a real-time diagnosis of malfunctions.

HIGH EFFICIENCY BLADES

It features high efficiency and tempered cutting blades, which can be replaced according to the material to be treated: plastic, paper, biomass and refuse derived fuel (RDF).

SMART HYDRAULIC SYSTEM

It easily adapts to the material to be treated. The pumps are outside of the oil tank for a better performance and easier maintenance.

HARDOX STEEL LINER

The wear-resistant HARDOX steel liners protect the machine from abrasion and corrosion. They are bolted both into the compacting chamber and extrusion channel for easier and quicker replacement

2X100 HP MOTOR POWER
CUTTING AND THRUST POWER 170 ton / 374 800 lb

Europa

  • PET 9.5 TON/H
  • OCC 18 TON/H
  • MIX PAPER 27 TON/H
  • RDF 32 TON/H

USA

  • PET 10.4 TON (US)/H
  • OCC 19.8 TON (US)/H
  • MIXED PAPER 29.7 TON (US)/H
  • RDF 35.2 TON (US)/H
GENERAL SPECIFICATIONS EUROPE USA
OVERALL LENGTH 14 000 45’11’’
MAXIMUM WIDTH 5 875 (at tier station) 19’3’’
OVERALL HEIGHT 3 972 (at flange hopper) 13’’
FEED OPENING 2 000 x 1 020 79’’ x 40’’
BALE DIMENSIONS 1 100 x 750 (dimens. WxH) 43’’ 1/3 x 29’’1/2
BALER WEIGHT WITHOUT FLUFFER 40 000 Kg (less oil) 88 184 lbs
BALER WEIGHT WITH FLUFFER 45 000 Kg (less oil) 99 208 lbs
NUMBERS OF WIRES 4 4
NO LOAD PERFOMANCE

Note: Performance rates, bale weights and bale densities are subject to moisture content, material pre-bale densities, feed rates nand other variables in baling.

2,3 m³ 81,2 ft³

LOADING VOLUME

552 m³/h 19 493 ft³/h

VOLUMETRIC PRODUCTION

5 5

CYCLES PER MINUTE

12 sec 12 sec

CYCLE TIME

Horizontal tying system

ELECTROMECHANICAL HORIZONTAL TYING SYSTEM DESIGNED FOR TYING BOTH PLASTIC AND STEEL WIRES

This system simplifies the cleaning process for the tying machine, guaranteeing greater safety for the operator. The maintenance and cleaning of the tying machine are carried out at floor level, operations on the steel wire are not required beneath the machine.

MATERIALS BALED BY mac 108/2

  • HIGH DENSITY BALES

  • WATERPROOF

  • EASY TO HANDLE

  • OPTIMAL STORAGE

  • ROAD TRANSPORT

  • RAIL TRANSPORT

  • SEA TRANSPORT

DOWNLOAD THE BROCHURE FOR MORE INFORMATION

Fill in the fields below to get all the details about the product or sector you are interested into



    If the download does not start automatically click here