MAC 108/2

NEW STANDARDS FOR BALING PLASTICS

THE NEW MULTI-MATERIAL BALER FOR BALING PLASTIC MATERIALS

IT BALES ALL PLASTIC MATERIALS IN PARTICULAR HDPE AND PET

The MAC 108/2 is the second model in our new generation of balers, recommended in particular for baling plastic materials like HDPE and PET.

It is the baler for those who have medium/high production requirements and who also need to obtain very high-density bales to reach the weight limits permitted in a container.

To combine these two requests, our designers created the new machine so that it would reach a specific pressure up to more than 20 kg/cm2, with bale format of 110×75 cm to reduce the empty spaces in the cargo vehicles to a minimum.

The result is a machine can reach densities above 500 kg/m3 with non-perforated PET; by adding the smaller bale size, optimized for transport efficiency (three rows vertically), the result is the possibility to load above 24 tonnes of PET on a truck.

Thus the bales produced with this baler have very high density, ideal for arranging the maximum weight that can be loaded in a lorry and container.

PANNEAU DE COMMANDE

COUPE ET POUSSÉE

HYDRAULIQUE

REVÊTEMENT

PANNEAU DE COMMANDE

The control panel allows better management and operation of the baler: production parameters can be adjusted (pressure and counterpressure, bale length, etc …), reports and statistics can be checked, and a graphics system allows a real-time diagnosis of malfunctions.

COUTEAUX HAUTE PERFORMANCE

It features high efficiency and tempered cutting blades, which can be replaced according to the material to be treated: plastic, paper, biomass and refuse derived fuel (RDF).

SYSTÈME HYDRAULIQUE INTELLIGENT

It easily adapts to the material to be treated. The pumps are outside of the oil tank for a better performance and easier maintenance.

REVÊTEMENT EN ACIER HARDOX

The wear-resistant HARDOX steel liners protect the machine from abrasion and corrosion. They are bolted both into the compacting chamber and extrusion channel for easier and quicker replacement

2X100 HP PUISSANCE MOTEUR

PUISSANCE DE COUPE ET DE POUSSÉE 170 ton / 374 800 lb

Europa

PET 9.5 TON/H
OCC 18 TON/H
MIX PAPER 27 TON/H
RDF 32 TON/H

USA

PET 10.4 TON (US)/H
OCC 19.8 TON (US)/H
MIXED PAPER 29.7 TON (US)/H
RDF 35.2 TON (US)/H

SPÉCIFICATIONS GÉNÉRALES	EUROPE	USA
LONGUEUR TOTALE	14 000	45’11’’
LARGEUR MAXIMALE	5 875 (au chariot aiguilles)	19’3’’
HAUTEUR MAXIMALE	3 972 (à la trémie à bride)	13’’
TRÉMIE DE CHARGEMENT	2 000 x 1 020	79’’ x 40’’
DIMENSIONS BALLES	1 100 x 750 (dimens. LxH)	43’’ 1/3 x 29’’1/2
POIDS PRESSE SANS VIRBULATEUR	40 000 Kg (sans huile)	88 148 lbs
POIDS PRESSE AVEC VIRBULATEUR	45 000 Kg (sans huile)	99 208 lbs
NOMBRE DE FILS	4	4

PRESTATIONS À VIDE

Les taux de rendement, le poids et la densité des balles dépendent de l’humidité et de la densité du matériau d’entrée, le taux d’alimentation et d’autres variables qui peuvent influer sur le processus de pressage.

2,3 m³ 81,2 ft³

VOLUME DE CHARGEMENT

552 m³/h 19 493 ft³/h

PRODUCTION VOLUMÉTRIQUE

5 5

CYCLES À LA MINUTE

12 sec 12 sec

TEMPS DE CYCLE

Horizontal tying system

ELECTROMECHANICAL HORIZONTAL TYING SYSTEM DESIGNED FOR TYING BOTH PLASTIC AND STEEL WIRES

This system simplifies the cleaning process for the tying machine, guaranteeing greater safety for the operator. The maintenance and cleaning of the tying machine are carried out at floor level, operations on the steel wire are not required beneath the machine.