Mac 112XL

THE BALER WITH ENHANCED PERFORMANCE

MAC 112 XL: THE EXTRA LARGE BALER FOR SORTING PLANTS THAT BALES LARGE QUANTITIES OF RECYCLABLE MATERIALS

IT COMPACTS AND BALES UP TO 16 TON/H OF PET, 27 TON/H OF OCC E 44 TON/H OF MIXED PAPER

The MAC 112 XL baler is the most important baler of the Macpresse range: sturdy but fast at the same time, it is able to bale any type of material, from recyclables to unsorted municipal solid waste.

Even in this case the bale format has been designed for transport with the most common methods. Because of the high bale density, the MAC112 is perfect for minimizing transport costs.

Download the brochure available in 6 languages

CONTROL PANEL

CUTTING AND THRUST

HYDRAULICS

LINER

CONTROL PANEL

The control panel allows better management and operation of the baler: production parameters can be adjusted (pressure and counterpressure, bale length, etc …), reports and statistics can be checked, and a graphics system allows a real-time diagnosis of malfunctions.

HIGH EFFICIENCY BLADES

The cutting system is a high efficiency system and the blades of the MAC 112XL baler are tempered and wear-resistant in order to optimize the excess material cutting process in the compacting chamber.

SMART HYDRAULIC SYSTEM

The hydraulic system adapts to the material to be treated and the baler is equipped with pumps outside of the oil tank for better performance and easier maintenance.

Variable flow pumps provide a perfect balance between thrust pressure and processing speed, while the high-efficiency IE3 motors guarantee consumption that are 30% lower compared to traditional motors.

HARDOX STEEL LINER

The MAC 112XL baler is protected with wear-resistant HARDOX steel liners which are bolted into the extrusion channel and into the compacting chamber and can be quickly and safely replaced.

2X120 HP MOTOR POWER

CUTTING AND THRUST POWER 200 TON / 441 000LB

Europa

PET 16,5 TON/H
CARDBOARD 28 TON/H
MIX PAPER 46 TON/H
RDF/SRF 52 TON/H

USA

PET 18.2 TON (US)/H
CARDBOARD 30.9 TON (US)/H
MIX PAPER 50.7 TON (US)/H
RDF/SRF 57.3 TON/H

GENERAL SPECIFICATIONS	EUROPE	USA
OVERALL LENGTH	13 950	45'9"
MAXIMUM WIDTH	6 125 (at tier station)	19'7"
OVERALL HEIGHT	4 265 (at tflange hopper)	13'12"
FEED OPENING	2 100 x 1 020	83" x 40"
BALE DIMENSIONS	1 100 x 1 100 (dimens. WxH)	43"1/3 x 43"1/3
BALER WEIGHT WITHOUT FLUFFER	55 500 Kg (less oil)	122 356 lb
BALER WEIGHT WITH FLUFFER	60 600 Kg (less oil)	133 600
NUMBERS OF WIRES	5	5

NO LOAD PERFOMANCE

Note: Performance rates, bale weights and bale densities are subject to moisture content, material pre-bale densities, feed rates nand other variables in baling.

2.9 m³ 102.4 ft³

LOADING VOLUME

783 m³/h 27 651 ft³/h

VOLUMETRIC PRODUCTION

4.5 4.5

CYCLES PER MINUTE

13.5 sec 13.5 sec

CYCLE TIME

Horizontal tying system

The MAC 112XL baler treats, compacts and bales large quantities of recyclable materials and its horizontal tying system can feature 5+3, 5 or 4 wires.