Mac 108/1

BALER FOR SECONDARY RAW MATERIALS AND PLASTIC MATERIALS

MAC 108/1: THE BALER FOR RECOVERY OF SECONDARY RAW MATERIALS PROCESSING MEDIUM AND LARGE QUANTITIES OF PRODUCT

IT BALES ALL MATERIALS COMING FROM SEPARATE COLLECTION AND PLASTIC MATERIALS

The MAC108/1 baler has been specially designed for compacting medium and large quantities of materials: recyclables, waste paper, aluminium cans and plastic materials difficult to treat such as big bags and rigid plastic.

The bale size obtained is perfect for storage and transport using the most common methods, such as trucks, containers and railroad cars.

Download the brochure available in 6 languages

CONTROL PANEL

CUTTING AND THRUST

HYDRAULICS

LINER

CONTROL PANEL

The control panel allows better management and operation of the baler: production parameters can be adjusted (pressure and counterpressure, bale length, etc …), reports and statistics can be checked, and a graphics system allows a real-time diagnosis of malfunctions.

HIGH EFFICIENCY BLADES

The blades are tempered and wear-resistant and optimize the excess material cutting process in the hopper. When baling plastic materials, the V-shaped cutting blades give the bales a perfect line on the upper surface, allowing them to be stocked in several vertical rows.

SMART HYDRAULIC SYSTEM

The hydraulic system adapts to the material to be treated and the baler is equipped with pumps outside of the oil tank for better performance and easier maintenance.

HARDOX STEEL LINER

The wear-resistant HARDOX steel liners are bolted into the extrusion channel and into the compacting chamber and can be easily replaced.

100 HP MOTOR POWER

CUTTING AND THRUST POWER 120 TON / 264 500 LB

Europa

PET 8 TON/H
CARDBOARD 16 TON/H
MIX PAPER 25 TON/H
RDF/SRF 30 TON/H

USA

PET 8.8 TON (US)/H
CARDBOARD 17.6 TON (US)/H
MIX PAPER 27.6 TON (US)/H
RDF/SRF 32.5 TON/H

GENERAL SPECIFICATIONS	EUROPE	USA
OVERALL LENGTH	13 220	43'4"
MAXIMUM WIDTH	6 010 (at tier station)	19'9"
OVERALL HEIGHT	4 315 (at flange hopper)	14'2"
FEED OPENING	1 800 x 950	71" x 37"1/2
BALE DIMENSIONS	1 100 x 1 000 (dimens. WxH)	43"1/3 x 39"1/2
BALER WEIGHT WITHOUT FLUFFER	38 650 Kg (less oil)	85 208 lb
BALER WEIGHT WITH FLUFFER	43 450 Kg (less oil)	95 790 lb
NUMBERS OF WIRES	5	5

NO LOAD PERFOMANCE

Note: Performance rates, bale weights and bale densities are subject to moisture content, material pre-bale densities, feed rates nand other variables in baling.

2.6 m³ 91.8 ft³

LOADING VOLUME

545 m³/h 19 246 ft³/h

VOLUMETRIC PRODUCTION

3.5 3.5

CYCLES PER MINUTE

17 sec 17 sec

CYCLE TIME

Horizontal tying system

The MAC108/1 baler compacts medium and large quantities of materials coming from separate collection and plastic materials. It features an horizontal tying system with 5+3, 5 or 4 wires. It has been designed to simplify the tying unit cleaning process ensuring greater safety for the operator.