Mac 107/2

NEW BALER MAC107/2 MIDSIZE FOR RECYCLABLES AND RDF

MAC 107/2: THE NEW MULTI-MATERIAL BALER PERFECT FOR MIDSIZE RECYCLING PLANTS, SRF & ENGINEERED FUEL

BALES UP TO 30% DENSER THAN THE MAC 107/1

The MAC 107/2 is the latest model of the /2 series. It processes all kinds of materials coming from the separated collection.

It is the baler for those who do not need high production, but who want to obtain at the same time a product quality equal to a machine with the large-scale output.

To meet this request, we have improved certain characteristics of the MAC 107/1, the previous baler: the tie and the extrusion channel have been reinforced and the counter-pressure cylinder has been increased. This way, compared to the /1, the density of the bales has been increased by 30% for cardboard and 15% for plastics, keeping the format of the bale small ( 110×75 cm).

The result is a higher density of the bales combined with greater production, without requiring excessive effort from the machine.

Download the brochure available in English languages

CONTROL PANEL

CUTTING AND THRUST

HYDRAULICS

LINER

CONTROL PANEL

The control panel allows better management and operation of the baler: production parameters can be adjusted (pressure and counterpressure, bale length, etc …), reports and statistics can be checked, and a graphics system allows a real-time diagnosis of malfunctions.

HIGH EFFICIENCY BLADES

It features high efficiency and tempered cutting blades, which can be replaced according to the material to be treated: plastic, PET, mixed paper, OCC and refuse derived fuel (RDF).

SMART HYDRAULIC SYSTEM

Smart system adaptable to material Pumps positioned outside of oil tank for a better performance and easier maintenance.

HARDOX STEEL LINER

The wear-resistant HARDOX steel liners are bolted into the extrusion channel and into the compacting chamber and can be easily replaced, protecting the machine from abrasion and corrosion.

100 HP MOTOR POWER

CUTTING AND THRUST POWER 95 TON / 209 450 LB

Europa

PET 7 TON/H
OCC 13.5 TON/H
MIX PAPER 22 TON/H
RDF 26.5 TON/H

USA

PET 7.7 TON (US)/H
OCC 14.8 TON (US)/H
MIX PAPER 24.2 TON (US)/H
RDF 29.1 TON (US)/H

GENERAL SPECIFICATIONS	EUROPE	USA
OVERALL LENGTH	9 950	32’8’’
MAXIMUM WIDTH	5 050 (AT TIER STATION)	16’7’’
OVERALL HEIGHT	3 860 (AT FLANGE HOPPER)	12’7’’
FEED OPENING	1 800 x 1 020	71’’ x 40’’
BALE DIMENSIONS	1 100 x 750 (dimens. WxH)	43’’1/3 x 29’’1/2
BALER WEIGHT WITHOUT FLUFFER	22 000 Kg (less oil)	48 501 lb
BALER WEIGHT WITH FLUFFER	26 500 Kg (less oil)	58 422 lb
NUMBERS OF WIRES	4	4

NO LOAD PERFOMANCE

Note: Performance rates, bale weights and bale densities are subject to moisture content, material pre-bale densities, feed rates nand other variables in baling.

1.6 m3 56.5 ft3

LOADING VOLUME

478 m3/h 16 880 ft3/h

VOLUMETRIC PRODUCTION

5 5

CYCLES PER MINUTE

12 sec 12 sec

CYCLE TIME

HORIZONTAL TYING SYSTEM

ELECTRO-MECHANICAL HORIZONTAL TYING SYSTEM DESIGNED FOR TYING BOTH PLASTIC AND STEEL WIRES

This system simplifies the cleaning process for the tying unit, providing increased safety for the operator. The maintenance and cleaning of the tying unit is done at floor level; replacement of baling wire is at floor level, no pit needed.