Mac 107/2
NEW BALER MAC107/2 MIDSIZE FOR RECYCLABLES AND RDF
MAC 107/2: THE NEW MULTI-MATERIAL BALER PERFECT FOR MIDSIZE RECYCLING PLANTS, SRF & ENGINEERED FUEL
BALES UP TO 30% DENSER THAN THE MAC 107/1
The MAC 107/2 is the latest model of the /2 series. It processes all kinds of materials coming from the separated collection.
It is the baler for those who do not need high production, but who want to obtain at the same time a product quality equal to a machine with the large-scale output.
To meet this request, we have improved certain characteristics of the MAC 107/1, the previous baler: the tie and the extrusion channel have been reinforced and the counter-pressure cylinder has been increased. This way, compared to the /1, the density of the bales has been increased by 30% for cardboard and 15% for plastics, keeping the format of the bale small ( 110×75 cm).
The result is a higher density of the bales combined with greater production, without requiring excessive effort from the machine.
Download the brochure available in English languages
LA BROCHUREPANNEAU DE COMMANDE
The control panel allows better management and operation of the baler: production parameters can be adjusted (pressure and counterpressure, bale length, etc …), reports and statistics can be checked, and a graphics system allows a real-time diagnosis of malfunctions.
COUTEAUX HAUTE PERFORMANCE
It features high efficiency and tempered cutting blades, which can be replaced according to the material to be treated: plastic, PET, mixed paper, OCC and refuse derived fuel (RDF).
SYSTÈME HYDRAULIQUE INTELLIGENT
Smart system adaptable to material Pumps positioned outside of oil tank for a better performance and easier maintenance.
REVÊTEMENT EN ACIER HARDOX
The wear-resistant HARDOX steel liners are bolted into the extrusion channel and into the compacting chamber and can be easily replaced, protecting the machine from abrasion and corrosion.
Europa
- PET 7 TON/H
- OCC 13.5 TON/H
- MIX PAPER 22 TON/H
- RDF 26.5 TON/H
USA
- PET 7.7 TON (US)/H
- OCC 14.8 TON (US)/H
- MIX PAPER 24.2 TON (US)/H
- RDF 29.1 TON (US)/H
SPÉCIFICATIONS GÉNÉRALES | EUROPE | USA |
---|---|---|
LONGUEUR TOTALE | 9 950 | 32’8’’ |
LARGEUR MAXIMALE | 5 050 (au chariot aiguilles) | 16’7’’ |
HAUTEUR MAXIMALE | 3 860 (à la trémie à bride) | 12’7’’ |
TRÉMIE DE CHARGEMENT | 1 800 x 1 020 | 71’’ x 40’’ |
DIMENSIONS BALLES | 1 100 x 750 (dimens. LxH) | 43’’1/3 x 29’’1/2 |
POIDS PRESSE SANS VIRBULATEUR | 22 000 Kg (sans huile) | 48 501 lb |
POIDS PRESSE AVEC VIRBULATEUR | 26 500 Kg (sans huile) | 58 422 lb |
NOMBRE DE FILS | 4 | 4 |
Les taux de rendement, le poids et la densité des balles dépendent de l’humidité et de la densité du matériau d’entrée, le taux d’alimentation et d’autres variables qui peuvent influer sur le processus de pressage.
VOLUME DE CHARGEMENT
PRODUCTION VOLUMÉTRIQUE
CYCLES À LA MINUTE
TEMPS DE CYCLE
HORIZONTAL TYING SYSTEM
ELECTRO-MECHANICAL HORIZONTAL TYING SYSTEM DESIGNED FOR TYING BOTH PLASTIC AND STEEL WIRES
This system simplifies the cleaning process for the tying unit, providing increased safety for the operator. The maintenance and cleaning of the tying unit is done at floor level; replacement of baling wire is at floor level, no pit needed.
MATERIALS BALED BY mac 107/2
-
BALLES HAUTE DENSITÉ
-
IMPERMÉABLE
-
FACILITE D'UTILISATION
-
STOCKAGE OPTIMAL
-
TRANSPORT ROUTIER
-
TRANSPORT FERROVIAIRE
-
TRANSPORT MARITIME