Mac 110L/1
MEDIUM-SIZED WASTE BALER - L SERIES
MAC 110L/1: MEDIUM-SIZED BALER FOR WASTE
IT BALES MUNICIPAL SOLID WASTE, INDUSTRIAL AND COMMERCIAL WASTE, RDF (REFUSE DERIVED FUEL)
MAC 110L/1 is a waste baler with an output capacity of 40-45 tons/hour. It has been designed for processing municipal solid waste, commercial and industrial waste (C&I) and refuse derived fuel (RDF).
It is the medium-sized version of Macpresse models – “L” series (MAC 108L/1, Mac 110L/1, Mac 111L/1, Mac 112), i.e. the series of balers specifically designed for baling any type of material, also non-recyclable materials. Thanks to a series of ad hoc measures, the L series is not affected by the problems relating to bulky materials and the organic fraction of waste.
Moreover – as all Mac balers – it features an optimal ratio between thrust pressure and compaction speed.
MAC 110L/1 is perfect for transfer stations, landfills and, more generally, for anyone who needs to process considerable flows of different materials.
Download the brochure available in 6 languages
DOWNLOAD BROCHURECONTROL PANEL
The control panel allows better management and operation of the baler: production parameters can be adjusted (pressure and counterpressure, bale length, etc …), reports and statistics can be checked, and a graphics system allows a real-time diagnosis of malfunctions.
BLADES SPECIFICALLY DESIGNED FOR WASTE
The cutting system of the L series has been specifically designed to improve excess material cutting process in the hopper. Tempered blades guarantee higher wear resistance.
SMART HYDRAULIC SYSTEM
It easily adapts to the material to be treated. The pumps are outside of the oil tank for a better performance and easier maintenance

HARDOX STEEL LINER
The wear-resistant HARDOX steel liners protect the machine from abrasion and corrosion. They are bolted both into the compacting chamber and extrusion channel for easier and quicker replacement.

Europa
- RDF 35 TON/H
- C&I 40 TON/H
- MSW 45 TON/H
USA
- RDF 38.6 TON (US)/H
- C&I 44.1 TON (US)/H
- MSW 49.6 TON (US)/H

GENERAL SPECIFICATIONS | EUROPE | USA |
---|---|---|
OVERALL LENGTH | 13 965 | 45'10" |
MAXIMUM WIDTH | 6 010 (at tier station) | 19'9" |
OVERALL HEIGHT | 4 315 (at flange hopper) | 14'2" |
FEED OPENING | 1 800 x 1020 | 71’’ x 40’’ |
BALE DIMENSIONS | 1 100 x 1 100 (dimens. WxH) | 43’’1/3 x 43’’1/3 |
BALER WEIGHT WITHOUT FLUFFER | 41 900 Kg (less oil) | 92 373 lb |
BALER WEIGHT WITH FLUFFER | 45 900 Kg (less oil) | 103 396 lb |
NUMBERS OF WIRES | 5 | 5 |
Note: Performance rates, bale weights and bale densities are subject to moisture content, material pre-bale densities, feed rates nand other variables in baling.
LOADING VOLUME
VOLUMETRIC PRODUCTION
CYCLES PER MINUTE
CYCLE TIME
HORIZONTAL TYING SYSTEM
The horizontal tying system is designed for tying using both plastic and iron wires. Moreover, a series of special measures protects the system from corrosion caused by the organic fraction of waste. It may feature 5 and 4 wires.
Macpresse waste balers are also equipped with hydraulic sliding doors to protect the tying unit.
MATERIALS BALED BY mac 110L/1
-
HIGH DENSITY BALES
-
WATERPROOF
-
EASY TO HANDLE
-
OPTIMAL STORAGE
-
ROAD TRANSPORT
-
RAIL TRANSPORT
-
SEA TRANSPORT