Mac 108L/1
WASTE BALER - L SERIES
MAC 108L/1: THE BALER FOR ALL TYPES OF WASTE
IT CAN BALE: UNSORTED MUNICIPAL SOLID WASTE, BULKY MATERIALS AND ALL RECYCLABLE MATERIALS
MAC 108L/1 is a waste baler specifically designed for processing municipal solid waste, commercial and industrial waste (C&I) and refuse derived fuel (RDF).
It can bale recyclable materials such as plastic, paper and aluminium, but also unsorted municipal solid waste containing organic material and bulkier materials.
It is the smallest version of Macpresse models – “L” series (MAC 108L/1, Mac 110L/1, Mac 111L/1, Mac 112), i.e. the series of balers specifically designed for baling any type of material, also non-recyclable materials. Thanks to a series of ad hoc measures, the L series is not affected by the problems relating to bulky materials and the organic fraction of waste.
Moreover – as all MAC balers – it features an optimal ratio between thrust pressure and compaction speed.
Transfer stations and landfills are the typical users of the MAC 108 L/1 baler.
Download the brochure available in 6 languages.
DOWNLOAD BROCHURE
CONTROL PANEL
The control panel allows better management and operation of the baler: production parameters can be adjusted (pressure and counterpressure, bale length, etc …), reports and statistics can be checked, and a graphics system allows a real-time diagnosis of malfunctions.
BLADES SPECIFICALLY DESIGNED FOR WASTE
The cutting system of the L series has been specifically designed to improve excess material cutting process in the hopper. Tempered blades guarantee higher wear resistance.
SMART HYDRAULIC SYSTEM
It easily adapts to the material to be treated. The pumps are outside of the oil tank for a better performance and easier maintenance.
HARDOX STEEL LINER
The wear-resistant HARDOX steel liners protect the machine from abrasion and corrosion. They are bolted both into the compacting chamber and extrusion channel for easier and quicker replacement.
Europa
- RDF 30 TON/H
- C&I 35 TON/H
- MSW 40 TON/H
USA
- RDF 33.1 TON (US)/H
- C&I 38.6 TON (US)/H
- MSW 44.1 TON (US)/H
| GENERAL SPECIFICATIONS | EUROPE | USA |
|---|---|---|
| OVERALL LENGTH | 13 220 | 43’4’’ |
| MAXIMUM WIDTH | 6 010 (at tier station) | 19’9’’ |
| OVERALL HEIGHT | 4 315 (AT FLANGE HOPPER) | 14’2’’ |
| FEED OPENING | 1 800 x 950 | 71’’ x 37’’1/2 |
| BALE DIMENSIONS | 1 100 x 1 000 (dimens. HxW) | 43’’1/3 x 39’’1/2 |
| BALER WEIGHT WITHOUT FLUFFER | 39 650 Kg (less oil) | 87 413 lbs |
| BALER WEIGHT WITH FLUFFER | 43 350 Kg (less oil) | 95 570 lbs |
| NUMBERS OF WIRES | 5 | 5 |
Note: Performance rates, bale weights and bale densities are subject to moisture content, material pre-bale densities, feed rates nand other variables in baling.
LOADING VOLUME
VOLUMETRIC PRODUCTION
CYCLES PER MINUTE
CYCLE TIME
HORIZONTAL TYING SYSTEM
The horizontal tying system is designed for tying using both plastic and iron wires. Moreover, a series of special measures protects the system from corrosion caused by the organic fraction of waste. It may feature 5 and 4 wires.
Macpresse waste balers are also equipped with hydraulic sliding doors to protect the tying unit.
MATERIALS BALED BY mac 108L/1
-
HIGH DENSITY BALES
-
WATERPROOF
-
EASY TO HANDLE
-
OPTIMAL STORAGE
-
ROAD TRANSPORT
-
RAIL TRANSPORT
-
SEA TRANSPORT
THE VIDEO BELOW SHOWS THE MAC 108L/1 BALER WHILE BALING AND WRAPPING REFUSE DERIVED FUEL AND SOLID RECOVERED FUEL (SRF) WITH PLASTIC FILM
Images of Mac 108L/1
YOU MAY ALSO BE INTERESTED IN
DOWNLOAD THE BROCHURE FOR MORE INFORMATION
Fill in the fields below to get all the details about the product or sector you are interested into
If the download does not start automatically click here
