Mac 107/2

NEW BALER MAC107/2 MIDSIZE FOR RECYCLABLES AND RDF

MAC 107/2: THE NEW MULTI-MATERIAL BALER PERFECT FOR MIDSIZE RECYCLING PLANTS, SRF & ENGINEERED FUEL

BALES UP TO 30% DENSER THAN THE MAC 107/1

The MAC 107/2 is the latest model of the /2 series. It processes all kinds of materials coming from the separated collection.

It is the baler for those who do not need high production, but who want to obtain at the same time a product quality equal to a machine with the large-scale output.

To meet this request, we have improved certain characteristics of the MAC 107/1, the previous baler: the tie and the extrusion channel have been reinforced and the counter-pressure cylinder has been increased. This way, compared to the /1, the density of the bales has been increased by 30% for cardboard and 15% for plastics, keeping the format of the bale small ( 110×75 cm).

The result is a higher density of the bales combined with greater production, without requiring excessive effort from the machine.

Download the brochure available in English languages

PAINEL DE CONTROLE

CORTE E COMPACTAÇÃO

SISTEMA HIDRÁULICO

REVESTIMENTO

PAINEL DE CONTROLE

The control panel allows better management and operation of the baler: production parameters can be adjusted (pressure and counterpressure, bale length, etc …), reports and statistics can be checked, and a graphics system allows a real-time diagnosis of malfunctions.

LÂMINAS DE ALTA EFICIÊNCIA

It features high efficiency and tempered cutting blades, which can be replaced according to the material to be treated: plastic, PET, mixed paper, OCC and refuse derived fuel (RDF).

SISTEMA HIDRÁULICO INTELIGENTE

Smart system adaptable to material Pumps positioned outside of oil tank for a better performance and easier maintenance.

REVESTIMENTO EM AÇO HARDOX

The wear-resistant HARDOX steel liners are bolted into the extrusion channel and into the compacting chamber and can be easily replaced, protecting the machine from abrasion and corrosion.

100 HP POTÊNCIA DO MOTOR

FORÇA DE COMPACTAÇÂO E CORTE 95 TON / 209 450 LB

Europa

PET 7 TON/H
CARTÃO 13.5 TON/H
PAPEL MISTO 22 TON/H
CDR 26.5 TON/H

USA

PET 7.7 TON (US)/H
CARTÃO 14.8 TON (US)/H
PAPEL MISTO 24.2 TON (US)/H
CDR 29.1 TON (US)/H

ESPECIFICAÇÕES GERAIS	Europa (MM)	USA
COMPRIMENTO TOTAL	9 950	32’8’’
LARGURA MÁXIMA	5 050 (na unidade de amarração)	16’7’’
ALTURA TOTAL	3 860 (na tremonha)	12’7’’
TREMONHA DE CARGA	1 800 x 1 020	71’’ x 40’’
DIMENSÕES DOS FARDOS	1 100 x 750 (dimens. LxH)	43’’1/3 x 29’’1/2
PESO DA PRENSA ENFARDADORA SEM DESFOLHADORA	22 000 Kg (menos óleo)	48 501 lb
PESO DA PRENSA ENFARDADORA COM DESFOLHADORA	26 500 Kg (menos óleo)	58 422 lb
NÚMERO DE ARAMES	4	4

DESEMPENHOS EM VAZIO

Taxas de desempenho, peso e densidade dos fardos dependem da umidade, denisidade pre-enfardamento, taxa de alimentaçao da máquina, velocidade de entrada e outras variaveis que podem influir no processo de enfardamento.

1.6 m3 56.5 ft3

VOLUME DE CARGA

478 m3/h 16 880 ft3/h

PRODUÇÃO VOLUMÉTRICA

5 5

CICLOS POR MINUTO

12 sec 12 sec

TEMPO DE CICLO

HORIZONTAL TYING SYSTEM

ELECTRO-MECHANICAL HORIZONTAL TYING SYSTEM DESIGNED FOR TYING BOTH PLASTIC AND STEEL WIRES

This system simplifies the cleaning process for the tying unit, providing increased safety for the operator. The maintenance and cleaning of the tying unit is done at floor level; replacement of baling wire is at floor level, no pit needed.