Mac 112

WASTE BALER, OUR TOP OF THE RANGE

MAC 112: THE LARGE-SIZED BALER FOR MUNICIPAL SOLID WASTE

IT BALES MUNICIPAL SOLID WASTE, INDUSTRIAL AND COMMERCIAL WASTE, RDF (REFUSE DERIVED FUEL)

MAC 112 is a large-sized baler for waste specially designed to treat all types of material: municipal solid waste, commercial and industrial (C&I) waste, refuse derived fuel (RDF), recyclables, biomass, unsorted municipal solid waste, even with organic material, etc.

The MAC 112 typical users are not only transfer stations and landfills, but all those plants that must process large quantities of material in a short time, without renouncing to bale quality and density.

Download the brochure available in 6 languages

DOWNLOAD BROCHURE
CONTROL PANEL
+
CUTTING AND THRUST
+
HYDRAULICS
+
LINER
+

CONTROL PANEL

The control panel allows better management and operation of the baler: production parameters can be adjusted (pressure and counterpressure, bale length, etc …), reports and statistics can be checked, and a graphics system allows a real-time diagnosis of malfunctions.

BLADES SPECIFICALLY DESIGNED FOR WASTE

The cutting system of the L series has been specifically designed to improve excess material cutting process in the hopper. Tempered blades guarantee higher wear resistance.

SMART HYDRAULIC SYSTEM

It easily adapts to the material to be treated. The pumps are outside of the oil tank for a better performance and easier maintenance.

HARDOX STEEL LINER

The wear-resistant HARDOX steel liners protect the machine from abrasion and corrosion. They are bolted both into the compacting chamber and extrusion channel for easier and quicker replacement.

2X100 HP MOTOR POWER
CUTTING AND THRUST POWER 200 TON / 441 000 LB

Europa

  • RDF 45 TON/H
  • C&I 52 TON/H
  • MSW 60 TON/H

USA

  • RDF 49.6 TON (US)/H
  • C&I 57.3 TON (US)/H
  • MSW 66.1 TON (US)/H
GENERAL SPECIFICATIONS EUROPE USA
OVERALL LENGTH 13 950 45’9’’
MAXIMUM WIDTH 5 965 (AT TIER STATION) 19’7’’
OVERALL HEIGHT 4 275 (AT FLANGE HOPPER) 14’0’’
FEED OPENING 2 000 x 1 020 79’’x40’’ 43’’1/3 x 43’’1/
BALE DIMENSIONS 1 100 x 1 100 (dimens. WxH) 43’’1/3 x 43’’1/3
BALER WEIGHT WITHOUT FLUFFER 52 250 Kg (less oil) 115 191 lb
BALER WEIGHT WITH FLUFFER 23255 950 Kg (less oil) 123 348 lb
NUMBERS OF WIRES 5 5
NO LOAD PERFOMANCE

Note: Performance rates, bale weights and bale densities are subject to moisture content, material pre-bale densities, feed rates nand other variables in baling.

2.8 m³ 98.8 ft³

LOADING VOLUME

701 m³/h 24 755 ft³/h

VOLUMETRIC PRODUCTION

4.2 4.2

CYCLES PER MINUTE

14 sec 14 sec

CYCLE TIME

HORIZONTAL TYING SYSTEM

The horizontal tying system is designed for tying using both plastic and iron wires. Moreover, a series of special measures protects the system from corrosion caused by the organic fraction of waste. It may feature 5 and 4 wires.

Macpresse waste balers are also equipped with hydraulic sliding doors to protect the tying unit.

MATERIALS BALED BY mac 112

  • HIGH DENSITY BALES

  • WATERPROOF

  • EASY TO HANDLE

  • OPTIMAL STORAGE

  • ROAD TRANSPORT

  • RAIL TRANSPORT

  • SEA TRANSPORT

DOWNLOAD THE BROCHURE FOR MORE INFORMATION

Fill in the fields below to get all the details about the product or sector you are interested into



Se il download non parte in automatico clicca qui