Mac 111AS/1

THE LARGE-SIZED BALER FOR RECYCLABLES

MAC 111 AS/1: THE BALER FOR RECYCLABLES PROCESSING LARGE QUANTITIES OF PRODUCT

FOR COMPACTING AND BALING LARGE QUANTITIES OF MIXED PAPER, PET, OCC

The MAC 111 AS/1 baler is designed to rapidly process large quantities of material, with particular attention to bulkier materials at the entrance: it treats paper, cardboard, big cardboard boxes, PET and all recyclables. MAC 111 is one of the most important machines of the Macpresse range.

It treats very different materials to obtain a bale format perfect for storage and transport with the most common methods, such as trucks, containers and railroad cars.

Download the brochure available in 6 languages

DOWNLOAD BROCHURE
CONTROL PANEL
+
CUTTING AND THRUST
+
HYDRAULICS
+
LINER
+

CONTROL PANEL

The control panel allows better management and operation of the baler: production parameters can be adjusted (pressure and counterpressure, bale length, etc …), reports and statistics can be checked, and a graphics system allows a real-time diagnosis of malfunctions.

HIGH EFFICIENCY BLADES

The cutting system is a high efficiency system and the blades of the MAC 111AS/1 baler are tempered and wear-resistant to optimize the excess material cutting process in the compacting chamber.

SMART HYDRAULIC SYSTEM

The hydraulic system adapts to the material to be treated and the baler is equipped with pumps outside of the oil tank for better performance and easier maintenance.

Variable flow pumps provide a perfect balance between thrust pressure and processing speed, while the high-efficiency IE3 motors guarantee consumption that are 30% lower compared to traditional motors.

HARDOX STEEL LINER

The MAC 111 AS/1 baler is protected with wear-resistant HARDOX steel liners which are bolted into the extrusion channel and into the compacting chamber and can be quickly and safely replaced

2X100 HP MOTOR POWER
CUTTING AND THRUST POWER 170 ton / 374 800 lb

Europa

  • PET 14 TON/H
  • CARDBOARD 25 TON/H
  • MIX PAPER 40 TON/H
  • RDF/SRF 45 TON/H

USA

  • PET 15.4 TON (US)/H
  • CARBOARD 27.6 TON (US)/H
  • MIX PAPER 44.1 TON (US)/H
  • RDF/SRF 48.5 TON/H
GENERAL SPECIFICATIONS EUROPE USA
OVERALL LENGTH 13 970 45'10"
MAXIMUM WIDTH 5 945(at tier station) 19'6"
OVERALL HEIGHT 4 055(at flange hopper) 13'4"
FEED OPENING 2 100 x 1 020 821/2" x 40"
BALE DIMENSIONS 1 100 x 1 100 (dimens. WxH) 43"1/3 x 43"1/3
BALER WEIGHT WITHOUT FLUFFER 43 200 Kg (less oil) 95 239 lb
BALER WEIGHT WITH FLUFFER 46 950 Kg (less oil) 103 507 lb
NUMBERS OF WIRES 5 5
NO LOAD PERFOMANCE

Note: Performance rates, bale weights and bale densities are subject to moisture content, material pre-bale densities, feed rates nand other variables in baling.

3.2 m³ 113 ft³

LOADING VOLUME

966 m³/h 34 114 ft³/h

VOLUMETRIC PRODUCTION

5 5

CYCLES PER MINUTE

12 sec 12 sec

CYCLE TIME

Horizontal tying system

The MAC baler 111 AS/1 treats, compacts and bales large quantities of recyclable materials and its horizontal tying system can feature 5+3, 5 or 4 wires.

MATERIALS BALED BY mac 111AS/1

  • HIGH DENSITY BALES

  • WATERPROOF

  • EASY TO HANDLE

  • OPTIMAL STORAGE

  • ROAD TRANSPORT

  • RAIL TRANSPORT

  • SEA TRANSPORT

DOWNLOAD THE BROCHURE FOR MORE INFORMATION

Fill in the fields below to get all the details about the product or sector you are interested into



Se il download non parte in automatico clicca qui